Dynavector-Tonabnehmer - HighEnd Audio Zimmermann

Warenkorb
Direkt zum Seiteninhalt
Dynavector - Tonabnehmer | Tonzellen | Pickups

"Dynavector Cartridges Japan" gilt als einer der führenden Hersteller von Hochleistungs-Moving-Coil-Kartuschen, die auf innovativer fortschrittlicher Theorie und einzigartiger Produktionstechnologie basieren.
Alle Dynavectors-Tonzellen verwenden die patentierte Magnetflussdämpfung und den Mechanismus des erweichten Magnetismus.
Die aktuellen Modelle sind der Höhepunkt jahrzehntelanger Forschung, Entwicklung und Verfeinerung. Ihre musikalischen Referenzen sind makellos, wie wir hoffen, dass Sie sie entdecken werden, wenn Sie sie hören.
- Sämtliche Zellen werden auf Wunsch bei uns professionell gegen kleines Geld eingebaut.
Kostenloser Versand |  Unsere Zahlungsmöglicheiten finden Sie hier
Dynavector DV 10X 5-EOL
High output MC with flux damper and softened magnetism
Output voltage: 2.5 mV | Frequency response: 20-­20.000 Hz (+-2db)
Channel balance: within 1 dB | Channel separation: 25 dB
Compliance: 12 mm/N | DC restistance: 150 Ω
Stylus Shape: elliptical | Cantilever: Aluminium pipe
Recommended load resistance: >1KΩ | Tracking: 1.8-­2.2g
Catridge weight: 6.6 g
sofort lieferbar - solange Vorrat
680.00 CHF(MwSt. Inkl.)
Hinzufügen
Dynavector DV 10X 5 MKII
High output MC with flux damper and softened magnetism
Output voltage: 2.8 mV | Frequency response: 20-­20.000 Hz (+-2db)
Channel balance: within 1 dB | Channel separation: 25 dB
Compliance: 12 mm/N | DC restistance: 150 Ω
Stylus Shape: "Shibata III" Line Contact | Cantilever: Aluminium pipe
Recommended load resistance: >1KΩ | Tracking: 1.8-­2.2g
Catridge weight: 7.5 g
Lieferbar innert 3 - 5 Tagen
850.00 CHF(MwSt. Inkl.)
Hinzufügen
Dynavector DV 20X2L
Low output MC with flux damper and softened magnetism
Output voltage: 0.3 mV | Frequency response: 20-­20.000 Hz (+-1db)
Channel balance: within 1 dB | Channel separation: 25 dB
Compliance: 12 mm/N | DC restistance: 5 Ω
Stylus Shape: Micro-ridge | Cantilever: Hard aluminium pipe
Recommended load resistance: >30 Ω | Tracking: 1.8-­2.2g
Catridge weight: 9.2 g
Lieferbar innert 3 - 5 Tagen
1100.00 CHF(MwSt. Inkl.)
Hinzufügen
Dynavector DV 20X2H
High output MC with flux damper and softened magnetism
Output voltage: 2.8 mV | Frequency response: 20-­20.000 Hz (+-1db)
Channel balance: within 1 dB | Channel separation: 25 dB
Compliance: 12 mm/N | DC restistance: 150 Ω
Stylus Shape: Micro-ridge | Cantilever: Hard aluminium pipe
Recommended load resistance: >1k Ω | Tracking: 1.8-­2.2g
Catridge weight: 9.2 g
sofort lieferbar
1100.00 CHF(MwSt. Inkl.)
Hinzufügen
Dynavector KARAT 17D3-EOL
Low output MC with flux damper and softened magnetism
Output voltage: 0.3 mV | Frequency response: 20-­20.000 Hz (+-1db)
Channel balance: within 1 dB | Channel separation: 25 dB
Compliance: 15 mm/N | DC restistance: 32 Ω
Stylus Shape: Micro-ridge | Cantilever: Solid diamond
Recommended load resistance: >100 Ω | Tracking: 1.8-­2.2g
Catridge weight: 5.8 g
sofort lieferbar - solange Vorrat!
1400.00 CHF(MwSt. Inkl.)
Hinzufügen
Dynavector KARAT 17DX NEW
Low output MC with flux damper and softened magnetism
Output voltage: 0.3 mV | Frequency response: 20-­20.000 Hz (+-1db)
Channel balance: within 1 dB | Channel separation: 25 dB
Compliance: 15 mm/N | DC restistance: 32 Ω
Stylus Shape: Micro-ridge | Cantilever: Solid diamond
Recommended load resistance: >100 Ω | Tracking: 1.8-­2.0g
Catridge weight: 11.0 g
Lieferbar innert 3 - 5 Tagen
2050.00 CHF(MwSt. Inkl.)
Hinzufügen
Dynavector DV XX2 MKII
Low output MC with flux damper and Alnico magnet
Output voltage: 0.28 mV | Frequency response: 20-­20.000 Hz (+-1db)
Channel balance: within 1 dB | Channel separation: 30 dB
Compliance: 10 mm/N | DC restistance: 6 Ω
Stylus Shape: PF line contact | Cantilever: Solid boron
Recommended load resistance: >30 Ω | Tracking: 1.8-­2.2g
Catridge weight: 8.9 g
Lieferbar innert 3 - 5 Tagen
1850.00 CHF(MwSt. Inkl.)
Hinzufügen
Dynavector Te Kaitora Rua
Low output MC with flux damper and Alnico magnet
Output voltage: 0.26 mV | Frequency response: 20-­20.000 Hz (+-1db)
Channel balance: within 1 dB | Channel separation: 30 dB
Compliance: 10 mm/N | DC restistance: 6 Ω
Stylus Shape: PF line contact | Cantilever: Solid boron
Recommended load resistance: >30 Ω | Tracking: 1.8-­2.2g
Catridge weight: 9.8 g
Lieferbar innert 3 - 5 Tagen
3850.00 CHF(MwSt. Inkl.)
Hinzufügen
Dynavector DV DRT XVE 1s
Low output MC with multi Alnico magnets and flux damper
Output voltage: 0.30 mV | Frequency response: 20-­20.000 Hz (+-1db)
Channel balance: within 1 dB | Channel separation: 30 dB
Compliance: 10 mm/N | DC restistance: 6 Ω
Stylus Shape: PF line contact | Cantilever: Solid boron
Recommended load resistance: >30 Ω | Tracking: 1.8-­2.2g
Catridge weight: 12.6 g
Lieferbar innert 3 - 5 Tagen
5350.00 CHF(MwSt. Inkl.)
Hinzufügen
Zurück zum Seiteninhalt